Sulzer 153 inches width TW11 Single color Tappet

THESE ARE MY LOOMS AT KARACHI PAKISTAN

Sulzer 153 inches width TW11 Single color Tappet

37 running Sulzer weaving Project in Pakistan.

37 looms Sulzer 153 inches width TW11 Single color Tappet Serial nos 46000 to 67000

All with following details.

Harness Frames = 6
Harness Shafts = 6
Harness Shaft levers = 6
Harness Catcher levers = 6
Tappets cams = 1 each
Weft Accumulators = 1 each IWF or TMT or Silver or Brown. with stand
Empty beams 900 mm = 1.5 each loom
Cloth rolls = 1 each
Projectiles = 17 on loom
Heald wires = 6000 on looms
Dropper = 6000 on looms
Reeds = 1 on loom as fitted

Besides following is available as spares and auxiliaries.

Harness Shafts = 74
Harness Shaft levers = 74
Tappets cams = 90
Weft Accumulators = 4 IWF type
empty beams 900 mm = 56
Cloth rolls = 5
Projectiles = 70 pcs
Heald wires = 77000
Dropper = 77000
Reeds = 1 lot (approx 80-100)

Others as an Extra equipments

Caterpillar Generator = 125 KVA Diesel
Power factor Plant = 1
Air compressor = 2 (3HP + 5HP)
Folding Machine = 1
Folding Tables = 2
Humidifier tunnel type = 3
Hoist = mechanical + electrical 1 each
Beam trolleys= 1
Cloth roll trolleys = 2
Electric Panel + Wiring + water proof tube-lights+ cables as installed.
Maintenance tools = 1 lot.

Running in Karachi - Pakistan

Full Factory FOB LOADED IN CONTAINERS USD 460,000/- NO BARGAIN

FOR SALE ....The line for jute yarn production

The line for jute yarn production

For production of yarn which used for technical fabric (fabric count 400 – 570 grams per sq. meter) manufacturing,

Yarn numbers produce line: № 2,8; 2,9; 3,2; 3,57.

Possible to add lavsan to jute for strengthening

Throughput: about 1050 kg in hour

Country of machinery manufacturing: Russia (former USSR)

For used machinery the condition is ideal

Possible to deliver both complete line and spinning machines separately

Machinery list
№	Name	comments	Quantity, pcs.
1	Raw material in-charging line PL-1-KL	79-83 yoc	6
2	Scribble carding machine CHG-115-PD	90 yoc	2
3	Carding machine CH-460-LЛ	76 yoc	12
4	Carding machine CH-600-L	80-87 yoc	10
5	Waste cleaning machine VOM		1
6	Bale press MGP2U		2
7	Assembly for emulsion's preparation RGE-Rm	two reactors per 500 liters, 77 yoc	1
8	Draw frame LCH-2-LO, 2-nd step	80-86 yoc	6
9	Draw frame LCH-2-LO, 2-nd step	shortened, 80-86 yoc	2
10	Draw frame LL-1-CH, 1-st step	86-90 yoc	27
11	Ring Spinning frames PS-100-LO1	per 120 spindels, 89 yoc	26
12	Ring Spinning frames PS-100-LO	per 100 spindels, 86 yoc	8
13	Converter LRSH-70	for adding of lavsan, 70-90 yoc	3

Ring spinning machine PS-100- LO

Designation

Ring spinning machine PS-100- LO is intended for producing yarn of dry spinning from the short jute or flaxen fiber and combings directly from the tape.

Technical characteristics

1. Theoretical productivity during the production of yarn of the linear density of 285 Tex, kg/h 26,7

2. number of spindles on machine, pieces 100

3. nominal distance between spindles, mm 100

4. kinematic frequency of the rotation of spindles in idling, r/min, in limits of 3500-3600

5. height of coil, mm, is not more than 300

6. linear density of manufactured yarn, Tex, in limits of 285-167

7. direction of twist is right

8. number of twistings on 1 m, in limits of 150-380

9. linear density of feed belt, [kteks], in limits of 6,7-2,5

10. drawing (kinematic), in limits of 15-40

11. Power of established electric motors, kW 14,55

12. Overall dimensions, mm:

length 11580

width (without the basins) 1000

height 1600

13. Mass of machine, kg 7000

14. for the work on machine is necessary the supply of the compressed air by pressure not less, MPa 0,4

I have a buyer want to buy this machine but they want to pay maximum euro 190,000 cnf please conform if it is possible to sale,

WANTED biomass fuel based co-generation (Combined Heat & Power) Plant

WANTED WANTED biomass fuel based co-generation (Combined Heat & Power) Plant

Denim Mills 01 no. of USED/Re-Conditioned biomass fuel based co-generation (Combined Heat & Power) Plant for its processing unit.

The said Plant should comprises on;

· Biomass fuel based boiler

· Steam turbine with controlled steam extraction

· Alternator

· Fuel feed system

· Ash handling system

· Air pollution control system

· Boiler water treatment system

· Cooling tower

· Air compressor

· Distributed Control System.

· All associated accessories required for plant operation

The Capacity of the Co-generation Plant required for US Denim process is;

Electricity Generation capacity: 3.0 MWe at 11,000 volts, 50-Hz, 3-phase

Steam extraction capacity: 15.0 tph at 140 psi, 350’F

Biomass fuel to be used will be, wood, wood waste, hulls, corncob, rice husk, etc.

Dismantling, shipping, overhauling/re-conditioning, supervision of erection, plant commissioning, guarantees, warrantees will also be required as a part of the deal.

Your feedback with technical and commercial details is awaited.